---
title: "Trade Scalper — User Guide · MyAlgoMate"
source: https://myalgomate.com/guide/trade-scalper
retrieved: 2026-11-17
publisher: MyAlgoMate (Myalgomate Technologies LLP, Rajkot, India)
---

# Trade Scalper — User Guide

Last updated: 16 November 2026

New to Trade Scalper? [See the product page](https://myalgomate.com/products/trade-scalper)

Setup

## Set up Trade Scalper, from nothing to your first order

Copy link

(Image: The workspace)

Trade Scalper is an order terminal. You choose the trade, and it places the order on every broker account you pick. It then watches your [stop-loss](https://myalgomate.com/glossary#stop-loss) and targets and exits for you.

This chapter takes you from nothing to a first order you have checked. Each step below is a page of its own, so you can send somebody a link to the exact step they are stuck on.

**Three things to sort out before you install anything**

None of them is part of the software.

**1. A Windows machine that stays on. A cloud server is best.**

Trade Scalper watches your trades from inside the application. If the machine sleeps or restarts, nothing watches your stop-loss and targets. A home PC that restarts itself for an update can leave a trade open with nobody looking after it.

Use [Cloud Server for Algo Trading](https://myalgomate.com/products/cloud-server-for-algo-trading). It stays on, and it comes with its own [static IP](https://myalgomate.com/glossary#static-ip). The minimum specification is **1 vCPU, 4 GB RAM and 50 GB HA NVMe**.

**2. A static IP.**

Your broker accepts [API](https://myalgomate.com/glossary#api) orders only from an address you have registered with them. Orders from any other address are refused.

A cloud server's own IP already counts as one. If you need another, get one from [Virtual Trading Environment](https://myalgomate.com/products/virtual-trading-environment).

> **One address for all accounts.** Trade Scalper sends every account through the same proxy. The proxy is set once, not per account. If each of your brokers insists on its own address, talk to our team before you buy.

**3. API access at your broker.**

Each broker gives you an [API key](https://myalgomate.com/glossary#api-key-and-secret) and a few other details. Some brokers charge for this or ask you to apply first. Check with your broker before your first day.

**A free trial needs all three.** The trial is the full software. In Live mode it places real orders, so it needs the same machine, static IP and broker access.

**The rest of the setup, in order**

1. Collect your broker's API details
2. Install Trade Scalper and sign in
3. Add your broker accounts
4. Enter the static IP details
5. Log your accounts in
6. Choose today's indices
7. Check the settings that change how orders go out
8. Press START
9. Place one Paper order and check it worked

## Step 1 — Collect your broker's API details

Copy link

(Image: Adding a Zerodha account)

Every broker gives you a set of [API](https://myalgomate.com/glossary#api) details. Collect them before you open Trade Scalper. Hunting for them halfway through is where most first days are lost.

Find your broker on [myalgomate.com/brokers](https://myalgomate.com/brokers). Each broker has its own page showing where the details live in that broker's portal.

**Trade Scalper links there for you.** In the Add Account window, under the broker list, there is a **How to get <broker> credentials** link. If you have not picked a broker yet, it reads **Broker setup guides**.

Most brokers ask for an [API key](https://myalgomate.com/glossary#api-key-and-secret), a secret, your client ID and a password or PIN. Brokers on the [XTS](https://myalgomate.com/glossary#symphony-xts-api) platform ask for more, including separate Market and Interactive keys. The full list is in *What each broker asks for*.

> **The [TOTP](https://myalgomate.com/glossary#totp-2fa) secret is not the six-digit code.** The six-digit number changes every thirty seconds. The TOTP secret is the long fixed text your broker shows you once, when you first switch on two-factor login. Trade Scalper needs the long text, so it can make the six-digit code itself. If you only saved the six-digit code, set up two-factor login at your broker again.

Keep these details safe. They let anyone place orders in your account.

## Step 2 — Install Trade Scalper and sign in

Copy link

(Image: The sign-in screen)

Download the installer from [your subscriptions](https://myaccount.myalgomate.com/user/account/subscription), copy it to your [cloud machine](https://myalgomate.com/glossary#vps-cloud-server), and run it.

Sign in with your **MyAlgoMate** account. That is the email and password you registered when you bought Trade Scalper or started the trial. It is **not** your broker login. Your broker details come in step 3.

**Choose [Paper Trade](https://myalgomate.com/glossary#paper-trading) before you go further.** Paper Trade runs every order inside Trade Scalper and sends nothing to your broker. Use it while you learn. See *Paper Trade or live*.

Full detail is in *Install and first run*.

## Step 3 — Add your broker accounts

Copy link

(Image: The A/C Management tab)

Open the **A/C Management** tab. This is where your broker accounts live.

Open **Accounts ▸ Add Account…**. Pick your broker first, because the fields change to match it. Then fill in the details you collected in step 1.

Three fields matter more than they look:

| Field | Why it matters |
| --- | --- |
| A/C Name | Your own label. It appears in every grid and log line, so pick one you recognise at a glance. |
| Client ID | Must match your broker exactly. A wrong client ID fails at login, not at save. |
| Multiplier | Scales every order for this account. Leave it at 1 to begin with. |

Add every account you plan to trade. See *Add a broker account* and *Account [multipliers](https://myalgomate.com/glossary#multiplier)*.

## Step 4 — Enter the static IP details

Copy link

(Image: An XTS-platform broker)

Skip this step if your broker does not check where your orders come from. Many do, so ask them if you are not sure.

The proxy settings sit near the bottom of the Add Account window, under **Shared for all accounts**. **You set this once and every account uses it.**

Tick **Enable Proxy**, then fill in the fields from your [static IP](https://myalgomate.com/glossary#static-ip) subscription.

| Field | Where it comes from |
| --- | --- |
| Host | The host name from your subscription |
| IP | The address, if you were given one instead of a host name |
| Port | The port from your subscription |
| Username | The proxy username, not your broker username |
| Password | The proxy password, not your broker password |

Then register that static IP with your broker. Your orders stay refused until your broker has it on their list.

## Step 5 — Log your accounts in

Copy link

(Image: The Accounts menu)

Adding an account saves it. It does not log it in. Log in **before** you press START, because it is not possible after.

Open the **Accounts** menu and choose **Login All Accounts**. Or use the **Login** button on each row.

If a login fails, the **Login Message** column says why. The usual causes are:

- a wrong client ID
- an expired [API key](https://myalgomate.com/glossary#api-key-and-secret)
- a [TOTP](https://myalgomate.com/glossary#totp-2fa) secret saved as the six-digit code
- a [static IP](https://myalgomate.com/glossary#static-ip) your broker has not registered yet

**Save the typing tomorrow.** Once your accounts work, save them as a template, or switch on **Auto Login on startup**. See *Logging in and account templates*.

## Step 6 — Choose today's indices

Copy link

(Image: Index Settings)

Each time Trade Scalper starts, **Index Settings** opens by itself with nothing ticked.

Tick the indices and commodities you will trade today, for example NIFTY and SENSEX. Check each expiry date. A date in red has already passed, so pick a new one.

There is no Save button. Changes save at once, and the top line says **Saved ✓**. Close the window when you are done.

See *Index and commodity settings*.

## Step 7 — Check the settings that change how orders go out

Copy link

(Image: Order setting)

A few settings change every order without telling you. Look at them once now, so nothing surprises you later.

| Look at | Why now |
| --- | --- |
| Order setting | Market or limit orders, and how a limit is chased. See Order setting. |
| RMS Settings | Your loss and profit limits across all accounts. See Limits across all accounts. |
| Account RMS | Limits for one account. See Limits on an account. |
| Telegram Alerts | A message on your phone when something happens. See Telegram alerts. |

You do not have to change any of them today. You do have to know they exist.

## Step 8 — Press START

Copy link

(Image: The Setup Guide)

Nothing can be traded until you press **START**. It is on the command bar, at the top right.

Trade Scalper checks a few things first, and refuses to start if any are missing. The usual reasons are instruments still downloading, no account logged in, or no index ticked.

The **Setup Guide** lists anything still outstanding and opens the screen that fixes it. Work down it, then press START again.

See *Pressing START*.

## Step 9 — Place one Paper order and check it worked

Copy link

(Image: Legs Detail)

Do not skip this. It is the difference between following a guide and knowing your set-up works.

Make sure the badge says [**PAPER TRADE**](https://myalgomate.com/glossary#paper-trading). Then press **Place Order** and place one small order: one lot, **Immediately**, with a [stop-loss](https://myalgomate.com/glossary#stop-loss).

Then check these four, in order:

1. **Legs Detail** — your trade is there, marked **RUNNING**.
2. [**Order Book**](https://myalgomate.com/glossary#order-book) — the order is there, marked **COMPLETE**.
3. **Position** — you hold what you meant to hold.
4. **Execution Logs** — a line for each step, in plain words.

Now exit the trade with its **Exit** button, and check that works too. See *Exiting positions*.

When all of that works in Paper, try Live with the smallest size you are willing to trade.

**If you get stuck**

| Problem | Read |
| --- | --- |
| An account will not log in | What each broker asks for |
| START is refused | Pressing START |
| An order did not go through | When an order does not go through |

Getting started

## Install and first run

Copy link

(Image: The sign-in screen)

Trade Scalper is a Windows application. A **Windows [cloud machine](https://myalgomate.com/glossary#vps-cloud-server)** is the recommended place to run it, because the app must stay running while your trades are open. Minimum specification: **1 vCPU · 4 GB RAM · 50 GB HA NVMe**.

**Getting the installer.** After your purchase, sign in to your MyAlgoMate account and open [your subscriptions](https://myaccount.myalgomate.com/user/account/subscription). Your Trade Scalper subscription is listed there with a **Download** button.

1. Download the installer from that page.
2. Connect to your cloud machine with Remote Desktop.
3. Copy the installer across, run it, and start Trade Scalper.

Sign in with your **MyAlgoMate account**: the email and password you registered with. These are not your broker details. Brokers are added later, one account at a time.

Before you sign in, choose the mode. [**Paper Trade**](https://myalgomate.com/glossary#paper-trading) sends no orders to your broker. Use it first.

On first start each day, the app downloads the list of instruments. Until it finishes, **START** stays unavailable and the footer says *Downloading instruments…*.

> Figures shown in screenshots throughout this guide are sample data for illustration, not results.

## The workspace

Copy link

(Image: The workspace)

Everything happens in one window.

- **The menu bar** — Session, Accounts, Strategies, View, Settings and Help.
- **The command bar** — **START**, [**EXIT ALL**](https://myalgomate.com/glossary#kill-switch), the Paper or Live badge, and the theme switch.
- **Market Watch** — your symbol lists, on the left.
- **Five tabs** — Legs Detail, [Order Book](https://myalgomate.com/glossary#order-book), Position, A/C Management and Index Summary.
- **Place Order** — the button above the tabs that opens a new ticket.
- **The log panel** — at the bottom, with Execution Logs and Application Logs.
- **The footer** — internet and price-feed status, the date and the time.

## Paper Trade or live

Copy link

(Image: The command bar)

The command bar holds the controls you use most.

- **START** begins the trading session. You cannot place an order before you press it.
- [**EXIT ALL**](https://myalgomate.com/glossary#kill-switch) closes everything on every account, at once.
- The [**PAPER TRADE**](https://myalgomate.com/glossary#paper-trading) badge shows the current mode.

In Paper mode the whole app works. Tickets are accepted, entries fill, [stop-losses](https://myalgomate.com/glossary#stop-loss) and targets are checked, and positions appear in the grids. No order reaches your broker.

Start every new set-up in **Paper** mode. It is the only way to see the whole flow with no money involved.

Connect your accounts

## Add a broker account

Copy link

(Image: The A/C Management tab)

**A/C Management** lists every broker account you have added.

Each row has its own buttons: **Login** or **Logout**, [**Exit All**](https://myalgomate.com/glossary#kill-switch) for that account, [**RMS**](https://myalgomate.com/glossary#rms) for its risk limits, and a **…** menu for the rest. The row also shows login status, P&L, funds, margin, risk caps and the [multiplier](https://myalgomate.com/glossary#multiplier).

To add an account, open **Accounts ▸ Add Account…** and pick your broker.

(Image: The Accounts menu)

## What each broker asks for

Copy link

(Image: Adding a Zerodha account)

Every account starts with the same three fields: **A/C Name** (your own label), **Client ID** and [**Multiplier**](https://myalgomate.com/glossary#multiplier). The rest of the form changes to match the broker you picked.

Most brokers ask for some of these: a **password** or **MPIN**, a **[TOTP](https://myalgomate.com/glossary#totp-2fa) secret**, and an [**API key**](https://myalgomate.com/glossary#api-key-and-secret) and **secret** from the broker's developer portal. A few also want a vendor code, a base URL or your date of birth.

**The exact fields for your broker are on our brokers page:** [myalgomate.com/brokers](https://myalgomate.com/brokers). The Add Account form links to your broker's page once you pick it.

Brokers on the [**XTS**](https://myalgomate.com/glossary#symphony-xts-api) platform share one longer form:

(Image: An XTS-platform broker)

It asks for a Market and an Interactive **[API](https://myalgomate.com/glossary#api) Key** and **Secret Key**, a **Base URL** and a **User Type**. Hostlookup, Binary Market Data and Dealer Code are optional.

> Get the API key and secret from your broker's own developer or API portal. Trade Scalper cannot create them for you.

## Account multipliers

Copy link

(Image: Account multipliers)

A large account and a small one can take the same trade at different sizes.

Set the [**Multiplier**](https://myalgomate.com/glossary#multiplier) in the Add Account form. It is also a column in A/C Management. The quantity on a ticket is multiplied by it on that account.

> **Example.** Your ticket says **2 lots**. An account with multiplier **3** trades **6 lots**. An account with multiplier **1** trades **2 lots**.

So you size the ticket once, and each account scales it.

## Logging in and account templates

Copy link

(Image: The Accounts menu)

Log your accounts in **before** you press START. Logging in is not possible after START.

| Menu item | What it does |
| --- | --- |
| Login All Accounts | Logs in every account you have added |
| Login Selected / Logout Selected | Acts only on the rows you have ticked |
| Auto Login on startup | Logs your accounts in each time the app starts |
| Delete Selected | Removes the ticked accounts |
| Save Account Template… | Writes your account set-up to a file |
| Load Account Template… | Loads it again, for example on a new cloud machine |

Each row in **A/C Management** also has its own **Login** and **Logout** button. If a login fails, the **Login Status** and **Login Message** columns tell you why.

Choose what you trade

## Index and commodity settings

Copy link

(Image: Index Settings)

Open **Settings ▸ Index Settings**. Here you choose which indices and commodities you trade today. It also **opens by itself every time you start Trade Scalper**, with nothing ticked. Tick today's list, check each expiry, and close it. Your expiry choices are kept. Only the ticks start fresh.

The left table lists the **NSE and BSE indices**: NIFTY, BANKNIFTY, FINNIFTY, MIDCPNIFTY, SENSEX and BANKEX. The right table lists the **MCX commodities**: GOLD, GOLDM, SILVER, SILVERM, CRUDEOIL and NATURALGAS.

For each row:

- **Active Index** — the tick that switches it on.
- **Expiry Date** — the expiry this index uses, with **DTE** (days to expiry) beside it. A date that has already passed shows in red: *has expired — pick a new date*.

There is no Save button. Every change is saved at once, and the line at the top says **Saving index settings…** and then **Saved ✓**. At least one index must stay ticked.

> **Open trades are kept.** Say you still hold a NIFTY trade but tick only SENSEX today. When you press START, NIFTY is ticked again and you see *Kept NIFTY ticked — you still have an open trade in it*. Trades opened outside Trade Scalper are not covered.

Index Settings are locked while trading is live. To change them, close and reopen Trade Scalper.

## Market Watch

Copy link

(Image: Market Watch)

**Market Watch** is the panel on the left of the main screen. It holds your own lists of symbols with live prices.

**Lists.** The first list is called *Scalp*. Press **+** to add a list, up to 10. Double-click a list's name to rename it. The bin icon deletes the list you are on.

**Adding a symbol.** Type at least two letters in the search box. Every word you type must appear in the symbol, so `nifty fut` finds the NIFTY futures. Use the arrow keys and Enter to pick one. Each list holds up to 50 symbols.

**Each row** shows the type tag (EQ, FUT, CE, PE or IDX), the exchange and [lot size](https://myalgomate.com/glossary#lot-size), the last price, and the change. The chips **All**, **EQ**, **FUT**, **OPT** and **IDX** filter the list.

**Trading from the list.** These work only after you press START.

| Key or button | What it does |
| --- | --- |
| B / S on a row | Opens the Place Order ticket with that symbol, ready to buy or sell |
| F2 / F3 | Buy or sell the selected row, from anywhere on the main screen |
| Place Order on an index row | Opens an empty ticket. An index cannot be traded itself |
| ↑ / ↓ | Move the selection |
| Del | Remove the selected row |

You can collapse the panel to a thin rail when you need the room. It remembers how you left it.

Place an order

## The Place Order ticket

Copy link

(Image: The Place Order ticket)

Press **Place Order** above the tabs, or **Strategies ▸ Place Order…**. It works after you press START.

The ticket has four steps, top to bottom.

> The green **LIVE** tag at the top of the ticket means prices are updating. It does not mean live trading. Your mode is the [**PAPER TRADE**](https://myalgomate.com/glossary#paper-trading) or live badge on the command bar.

**1 · Symbol to watch.** Type in the search box and pick from the list. It finds stocks, futures, options and MCX contracts in one search, for example `RELIANCE`, `RELIANCE FUT` or `NIFTY 25250 CE`. The indices you ticked today are listed first.

**2 · When to enter.** See the next section.

**3 · What to trade.**

- **Your view** — **BUY** if you expect the price to rise, **SELL** if you expect it to fall.
- **Trade in** — the symbol itself, its future, or a call or put on it. The side sent to the broker follows your choice. For example, a bearish view traded in a put buys the put.
- **Quantity** — in lots. Use the arrows, or the quick buttons 1, 2, 5, 10, 25 and 50. The ticket shows the last price and the value of the trade.
- **Trade Type** — **Intraday** closes the same day. **Positional** carries the trade overnight.
- **Product** — [MIS](https://myalgomate.com/glossary#mis) or [CNC](https://myalgomate.com/glossary#cnc) for stocks, MIS or [NRML](https://myalgomate.com/glossary#nrml) for F&O and MCX. Positional sets CNC or NRML for you.

**4 · Exit Rules.** Your [stop-loss](https://myalgomate.com/glossary#stop-loss) and targets. See the section after next.

Then, at the foot of the ticket:

- **Trading Account** — tick the broker accounts to trade on. **All** and **Clear** help with many accounts. A **Ready** or **Offline** badge shows each account's login state.
- **Alias Tag** — a short name for this trade. It fills in as `S1`, `S2` and so on. It must be unique.

Press **Place**. If something is wrong, the message shows beside the Place button. Nothing is sent until every check passes.

The ticket remembers your accounts, quantity, product and entry mode for next time. The symbol, stop-loss and targets start fresh.

## When to enter, stop-loss and targets

Copy link

(Image: Exit Rules)

**When to enter**

| Choice | What happens |
| --- | --- |
| Immediately | The order is placed now |
| Crosses above ▲ + Trigger Price | Waits until the price goes above your level, then places the order once |
| Crosses below ▼ + Trigger Price | Waits until the price goes below your level, then places the order once |

For **Immediately**, the app waits up to 30 seconds for a live price. If none arrives, the ticket is refused.

[**Stop-loss**](https://myalgomate.com/glossary#stop-loss)

Choose **None**, **%**, **Pts** or **Price**, and type the value. When the stop-loss is hit, the whole position is closed.

**Place [SL order](https://myalgomate.com/glossary#stop-loss-order) in broker** puts the stop-loss at the broker as a real order. It then works even if your machine stops. Unticked, the app watches the price and exits for you.

**Targets**

Add up to **five** targets. For each one, choose **%**, **Pts** or **Price**, then the exit size in **Lots** or **%**.

- With one target, its size is the whole position (100%).
- With two or more, split the size between them. The total cannot be more than your quantity.
- The ticket refuses two targets at the same price.

**Measure exits on** decides what the stop-loss and targets are counted on:

- **Traded contract** — the price of what you trade.
- **Watched chart** — the price of the symbol you watch, for example NIFTY. These exits are held in the app, not at the broker.

Values in % or Pts are worked out from the actual fill price. Exact prices are set straight away.

## Index trigger and ATM strikes

Copy link

(Image: An index trigger with an ATM call)

Watch an index and trade an option on it.

1. In step 1, pick an index, for example **NIFTY**.
2. In step 2, choose **Crosses above ▲** or **Crosses below ▼** and type the level.
3. In step 3, choose **Call**, **Put** or **Future**.
4. For an option, choose **[ATM](https://myalgomate.com/glossary#at-the-money) based** or **Pick strike**, and the expiry.

**ATM based** chooses the strike when the trigger fires, not when you place the ticket. **Offset** moves it away from ATM. +1 is one strike out of the money, for both calls and puts.

> **Example.** NIFTY is at 25,240. You set *crosses above 25,300*, **Call**, **ATM based**, offset 0. At 11:05 NIFTY crosses 25,300. The app buys the 25,300 call, because that is ATM at that moment.

Until it fires, the order shows as **ARMED** in Legs Detail. An armed order that has not fired by **15:15** is cancelled.

The price must actually cross your level. If NIFTY is already above 25,300 when you place the ticket, it waits for NIFTY to dip below and cross back up.

Risk management

## Limits on an account

Copy link

(Image: Per-account risk settings)

Account limits watch one broker account as a whole, whatever trades it holds.

Press [**RMS**](https://myalgomate.com/glossary#rms) on any row of **A/C Management**.

| Control | What it does |
| --- | --- |
| Max Loss | Close everything on this account when the loss reaches this figure |
| Max Profit | Close everything on this account when the profit reaches this figure |
| Frequency | How often the limit is checked |
| Exit Mode | Act at once, after a delay in seconds, or after a number of ticks |
| Trail Max Loss (X / Y) | For every X the account gains, move the loss limit by Y |
| Protect Profit | Ignore, Lock Min Profits, Trail Profits or Lock & Trail Profits |
| If Profit Reaches · Lock Min Profit At | The profit that starts locking, and the minimum then kept |
| Increase In Profit · Trail Min Profit By | How far profit must rise to move the lock, and by how much |
| Exit Time | Close this account at a time you choose |

**Exit Mode** stops one sudden price spike from closing you out. With *after 3 ticks*, the limit must hold for three price updates in a row before it acts.

Once set, A/C Management shows the account's running P&L, whether trading has stopped, and the profit currently locked.

Risk settings stay editable while trading is live. A setting that is switched off reads **Disabled**.

## Limits across all accounts

Copy link

(Image: Global RMS settings)

Global limits watch **all your accounts added together**.

Open **Settings ▸ [RMS](https://myalgomate.com/glossary#rms) Settings**.

| Control | What it does |
| --- | --- |
| Max Loss (-) | Close every account when the combined loss reaches this figure |
| Max Profit (+) | Close every account when the combined profit reaches this figure |
| Frequency | How often the total is checked |
| Exit Mode | Act at once, after a delay in seconds, or after a number of ticks |
| Trail Max Loss X / Y | For every X the total gains, move the loss limit by Y |
| Intraday Time Base Exit | Close everything, on every account, at the time you set |
| Protect Profit | The same four modes, on the combined profit |
| If Profit Reaches · Lock Min Profit At | The combined profit that starts locking, and the minimum then kept |
| Increase In Profit · Trail Min Profit By | How far the total must rise to move the lock, and by how much |

Press **Save RMS** after any change.

> **Example.** Three accounts are up and one is down. Global [Max Profit](https://myalgomate.com/glossary#max-profit) looks at the net of all four. When that net reaches your figure, all four are closed together.

Account limits and global limits both run. Whichever is reached first acts.

Go live

## Pressing START

Copy link

(Image: The Setup Guide)

**START** begins the trading session. Before you press it:

1. **Instruments downloaded** — the footer no longer says *Downloading instruments…*.
2. **Accounts logged in** — use **Accounts ▸ Login All Accounts**. You cannot log in after START.
3. **Indices ticked** — in **Settings ▸ Index Settings**. It opens by itself at every launch. If you press START with nothing ticked, it opens again.
4. **Mode checked** — Paper or Live, shown on the command bar.

The **Setup Guide** tracks each step and opens the screen that fixes it. It opens by itself when something is missing, and closes itself once START succeeds.

When START succeeds:

- **Place Order** and the Market Watch **B** and **S** buttons become available.
- Your trades from earlier today are loaded again, with their [stop-loss](https://myalgomate.com/glossary#stop-loss) and targets.
- An index with an open trade is ticked again if you left it unticked.

Monitor and manage

## The live views

Copy link

(Image: The Legs Detail tab)

Each tab answers one question.

**Legs Detail** — every trade, one row per account. It shows symbol, side, quantity, status, entry price, [stop-loss](https://myalgomate.com/glossary#stop-loss), targets and P&L.

[**Order Book**](https://myalgomate.com/glossary#order-book) — every order sent to a broker, with its status and any rejection message.

(Image: The Order Book tab)

**Position** — net positions by symbol, with live prices.

(Image: The Position tab)

**A/C Management** — your broker accounts: login state, funds, margin and risk limits.

**Index Summary** — each index you trade, with spot, future and synthetic-future prices, the [ATM](https://myalgomate.com/glossary#at-the-money) strike, and your profit or loss in it.

(Image: The Index Summary tab)

## Changing a trade after it is placed

Copy link

(Image: The Update window)

Every trade has its own row in **Legs Detail**. **Exit** is on the row. The other actions are in the **…** menu.

| Action | When | What it does |
| --- | --- | --- |
| Exit | Trade is running | Closes it now |
| Update | Any time before it is closed | Change the stop-loss, the targets, or the waiting entry price |
| Fill immediate | Entry is still waiting | Places the entry now instead of waiting |
| Copy | Any time | Opens a new ticket filled in from this trade, with a new alias |
| Part Book | Trade is running | Closes part of it. See Booking part of a position |
| Delete | Trade is closed | Removes the row |

In the **Update** window you can change each level's price. A new waiting price is checked against the current price again. Tick **Modify to all A/C legs** to make the same change on every account that has this trade.

Once a trade has entered, its entry mode cannot change. A closed trade opens read-only.

To act on many trades at once, tick their rows and use **Exit Selected** or **Delete Selected**.

## Making the grids yours

Copy link

(Image: Column tools)

Every grid has the same tools, and every change is remembered.

- **COLUMNS** — show or hide any column, and drag columns into the order you want.
- **Filter** — a spreadsheet-style panel on each column header. Search, tick the values you want, or clear.
- **Freeze** — keep the key columns in place while the rest scrolls.
- **Pin actions** — bring the row buttons you use most out of the **…** menu.
- **Reset** — put a grid back to its defaults.

## Exiting positions

Copy link

(Image: EXIT ALL on the command bar)

There is an exit at every level, and each one is one click.

| Where | What it closes |
| --- | --- |
| Legs Detail row ▸ Exit | That trade on that account |
| Legs Detail ▸ Exit Selected | Every ticked trade |
| A/C Management row ▸ Exit All | Everything on that account |
| EXIT ALL on the command bar | Everything, on every account |

**Part Book** closes part of a trade instead of all of it.

Do not close Trade Scalper while trades are open. Exits held in the app stop when the app stops. **Session ▸ Exit Trade-Scalper** asks you to confirm for this reason.

## Booking part of a position

Copy link

(Image: Part Book)

**Part Book** closes some of an open trade and keeps the rest running.

1. In **Legs Detail**, open the **…** menu on a running trade.
2. Choose **Part Book**.
3. Choose **By Lots** or **By Percentage**, and type the amount.

> **Example.** You hold 4 lots. Part Book **By Lots 1** closes 1 lot. The other 3 lots keep their [stop-loss](https://myalgomate.com/glossary#stop-loss) and targets.

## The MTM chart

Copy link

(Image: The MTM Visualizer)

Open **View ▸ [MTM](https://myalgomate.com/glossary#mark-to-market) Chart…** for the **MTM Visualizer**. It draws your profit and loss across the day, not only the current figure.

It opens as its **own window**. Clicking elsewhere does not close it, so you can keep it beside the workspace. Drag the title bar to move it, and drag an edge to resize it. It reopens where you left it.

**Reading the chart**

- The shaded area is green above zero and red below.
- Move the pointer across the chart to see every line's value at that moment.
- The last part of the line is **dashed**. That is the minute still forming. It becomes a normal point when the minute closes.
- **Drag across the chart to zoom** into a time range. **Reset Zoom** goes back.

**Choosing what to plot**

- **Level** — **Global**, **Account**, **Portfolio** or **Strategy**. All your Place Order trades sit in one portfolio called *Place Order*. Each trade is a strategy, named by its Alias Tag.
- The **legend** at the bottom turns lines on and off. Click a chip to show or hide it.

**Global MTM**, **High** and **Low** sit along the top, with the time each high and low was reached.

Settings

## Order setting

Copy link

(Image: Order setting)

Open **Settings ▸ Order setting**. These settings decide how each order is priced and what happens if it does not fill.

There are two tabs. **EQ-fut order setting** is used for stocks and futures. **Opt order setting** is used for options. Each tab has an **Entry Order**, an **Exit Order (Non SL)** and an **[SL Order](https://myalgomate.com/glossary#stop-loss-order) Setting** group, plus **Order Rejection Retry Settings**.

| Setting | What it does |
| --- | --- |
| Limit Price Ref. | Price the order from the LTP, the best bid or ask, or the average of the two |
| Limit Buffer | How far past that price to set the limit, in % or points |
| If Not Filled | Revise the limit price, or keep waiting |
| Revision After (In Sec.) · No. of Revision | How often to revise the price, and how many times |
| If Not Filled After Max Revision | What to do once the revisions run out |
| Enable Retry · No of retry · Retry Interval (In Sec.) | Try a rejected order again, how many times, and how long to wait |

Orders are sent as [limit orders](https://myalgomate.com/glossary#limit-order). Every change is saved at once. These settings are locked while trading is live.

## Telegram alerts

Copy link

(Image: Telegram settings)

Open **Settings ▸ Telegram Alerts** to get updates on your phone.

1. **Send Telegram Alerts** — the main switch.
2. **Bot Token** — you get it from BotFather in Telegram when you create the bot.
3. **Channel Id** — the channel or chat the bot posts to.
4. **Live [MTM](https://myalgomate.com/glossary#mark-to-market) Alerts** — optional regular updates of your profit and loss.
5. **Telegram Time Frame** — how often those updates are sent.

These settings are shared by every account, so you set them once. They are locked while trading is live.

## Appearance and data

Copy link

(Image: General settings)

Open **Settings ▸ General**.

| Setting | What it does |
| --- | --- |
| Theme | Dark or Light. The in-app user guide follows it |
| Density | Comfortable or Compact rows in every grid |
| Auto Delete Logs · Delete after (Days) | How many days of logs to keep |
| Check Condition Next Day After (NSE / MCX) | The time each market opens, so waiting orders are not checked before it |

**Settings ▸ Reset & Data** clears stored data if you want to start clean. Each area has its own reset button. It is locked while trading is live.

Reports and housekeeping

## Exporting your data

Copy link

(Image: The Session menu)

**Session ▸ Export All Grids…** writes every grid to Excel in one step. The shortcut is **Ctrl+E**.

Exports include every column, not only the ones on screen.

Your account set-up is saved separately, with **Accounts ▸ Save Account Template…**.

## Logs

Copy link

(Image: Execution logs)

The panel at the bottom of the window has two tabs. It opens on **Execution Logs**.

- **Execution Logs** — what happened to your trades: orders placed, entries, [stop-loss](https://myalgomate.com/glossary#stop-loss) hits, targets, exits, and why anything was refused.
- **Application Logs** — the app's own activity: logins, downloads and connection state.

Each line has an **Event** tag: Entry, Exit, Stop-loss, Target, Order, Warning, Error or System. Click a tag chip above the grid to show only those lines. Error lines and actual stop-loss hits are highlighted.

Messages are written in plain words, for example *Entered at 146.35 (market 142.20) · SL 136.35 · Target 156.35*. Technical lines are hidden. Switch on **Show technical lines** to see them.

**OPEN LOG** opens the full file on disk, and **CLEAR** empties the view. **Settings ▸ General** sets how many days of logs are kept.

Troubleshooting

## When an order does not go through

Copy link

(Image: When an order does not go through)

Start with the message beside the **Place** button, then the **Execution Logs**.

| What you see | Why | What to do |
| --- | --- | --- |
| Place Order is greyed out | START has not been pressed, or no account is logged in | Log in your accounts, then press START |
| Tick at least one index to start | No index is ticked | Tick an index in Settings ▸ Index Settings |
| A market-hours message | The market for that segment is closed | Stocks and F&O: 09:15 to 15:40. MCX: 09:00 to 23:55 |
| This alias name already exists | Another trade has that Alias Tag | Use the next free name, such as S5 |
| Target sizes do not add up | Exit sizes total more than your quantity | Lower the target sizes, or raise the quantity |
| The ticket is refused after 30 seconds | No live price arrived for the symbol | Check the price feed in the footer, then try again |
| Order is REJECTED in Order Book | The broker refused it | Read the reason in Order Book. Common causes are low margin or a price outside the allowed band |
| An index order stays ARMED | The index has not crossed your level yet | It fires on a fresh cross. It is cancelled at 15:15 if it has not fired |
| An expiry shows in red | The saved expiry date has passed | Pick a new date in Settings ▸ Index Settings |

If you still cannot find the cause, use **Help ▸ Raise Ticket…** and attach the log file from **OPEN LOG**.

[← Back to Trade Scalper](https://myalgomate.com/products/trade-scalper)

---
MyAlgoMate is a technology provider: its software automates the user's own trading rules. It does not give
trading tips, calls or investment advice and never promises returns. Site map for AI assistants:
https://myalgomate.com/llms.txt
